-3x Cree XP-L HI LED emitters
-3.7V 14500 (AA size) battery powered (not included)
-Solid brass construction
-Programmable user interface
-Anti reflective coated glass lens
-SS 3x Optic
-1,475 OTF lumens
Warning: Last items in stock!
CNC machined in the USA from solid brass. The lights come with pre-drilled holes for the optional spring tempered stainless steel pocket clip. The 3 LED light engine provides a soft beam with a large wide hot spot and impressive spill. The custom user interface provides the ultimate in flexibility.
Pocket Clip: Stainless (optional)
Length: 4.0 inches
Max OD: 1.0 inches
Weight: 4.9 oz (without battery)
Battery Type: 3.7V IMR 14500 (Not included)
Random sample of each of the 3 tested for output at 30 seconds run time
V3 1B: 1536 lumen
V2 3A: 1454 lumen
219C: 1010 lumen
Battery life estimates (drive current is around 5000ma on high)
High: 10 min
Med: 30 min
Low: 12 hours
Modes can by cycled and any time during use by a tap of the switch. When the light is turned off for more than 3 seconds the microchip will memorize the last mode used ( off time memory).
None other than Dr.Jones Guppy2drv. This UI offers a wide range of modes to choose from. Something for almost any occasion.
User Selectable Groups:
To switch mode groups: rapidly tap the switch 8 times, the light will then enter the programming mode and begin to flash. With the light in programming mode, tap the switch the same number of times as your desired mode group. The light will blink and your mode group will be memorized.
Example: To select mode group 3, tap the switch 8 times quickly to enter programming mode. As soon as the light enters programming mode and beings flashing, tap the switch three times. The light will blink to recognize the mode group change.
To set the turbo timer: rapidly tap the switch 8 times, the light will then enter the programming mode and begin to flash. With the light in programming mode, tap the switch 30 times to enter the turbo timer set mode. The light will then switch to 100% power. When the light is at the desired temperature for the turbo step down, turn the light off. The turbo timer will then be set. The turbo timer steps the light down to 50% regardless of the mode group set.
To disable the turbo timer simply go into program and cut it off in >3 seconds.
Please be aware of the heat. When the head of the light is hot to the touch you need to reduce output to a lower mode. Do NOT leave the light running unattended.
Here is a short video on how this UI works.
ASFlashlights are built with premium components, including top bin emitters, upgraded thermal paths and heat sinking, and extreme output custom driver boards. Output from light to light will vary slightly, and also depends on selected emitter bin when applicable, but all the lumen claims are a result of actual out the front measurements, and guaranteed to be realistic.
Please Note: These lights are very high powered, and have the potential to cause fire, eye injury, burning of skin and other. Adventure Sport Flashlights™ is NOT responsible for accidents or damage including but not limited to fire or personal injury resulting from use or misuse of its products. By purchasing you agree to these terms.