-5,000 lumen 3x Cree XHP-50 dropin bulb
-2 D cell size Maglite host
- Body sleeve and short spring conversion for 2x 26650 use
- High temp glass lens
- User selectable modes
- 240 meter range (14,700 lux)
Warning: Last items in stock!
Fully converted and ready to go! This 2 D size is equipped with the full power of the A.S.Flashlights 3x XHP-50 Superbulb™. Also installed are the 2x 26650 body sleeve, recessed tail spring, and high temp glass lens.
If you already have 3.7V 26650 batteries or the charger select "No thanks" from the include options listed above. 2x 3.7V cells are required to use this light. 1.5V D batteries will not work.
The bulb is a simple 3 mode Low, Medium, High with memory by default, however its easily customized for those who like a taste of something different.
Run time approximation(based on use of 2x 26650 cells):High: 50 min
Med: 3.5 hours
Low: 87 hours
DrJones Guppy2drv. This firmware allows the ultimate in user customizability, with 24 built-in mode groups, that the user can select via a series of button presses and the option of user programmable turbo timer that will automatically step the power down to 50% after the set time is hit (see below for instructions).
User Selectable Groups:
To switch mode groups: rapidly tap the switch 8 times, the light will then enter the programming mode and begin to flash. With the light in programming mode, tap the switch the same number of times as your desired mode group. The light will blink and your mode group will be memorized.
Example: To select mode group 3, tap the switch 8 times quickly to enter programming mode. As soon as the light enters programming mode and beings flashing, tap the switch three times. The light will blink to recognize the mode group change.
To set the turbo timer: rapidly tap the switch 8 times, the light will then enter the programming mode and begin to flash. With the light in programming mode, tap the switch 30 times to enter the turbo timer set mode. The light will then switch to 100% power. When the light is at the desired temperature for the turbo step down, turn the light off. The turbo timer will then be set. The turbo timer steps the light down to 50% regardless of the mode group set.
To disable the turbo timer simply go into program and cut it off in >3 seconds.
Here is a short video on how this UI works.
Adventure Sport Flashlights™ is not affiliated with Mag instrument inc. which owns the MAG family of trade marks including Mag-Lite and Mini-Maglite. Custom shorty flashlights are not made, endorsed, recommended, licensed or approved by Mag instruments inc.