Convoy S2+, 915 Lumen, 18350, XPL-HI V2

New product

-Cree XPL-HI  LED emitter, 6500k color temp

-IMR 18350 powered

-Choose your on modes custom UI (3 mode with memory by default)

-Low voltage protection

-lanyard included

-Size: 84mm x 24mm

-Color: Grey

-Optional pocket clip

More details

$55.88

Add to wishlist

More info

The pinnacle of pocket power!



The Adventure Sport™ Custom S2+ is the perfect synergy of form and function, it an ultra tiny package.

This light combines its small form factor with a flexible intelligent user interface and extreme output of the Cree XPL-HI LED.

The light is powered by a single IMR 18350 cell (batteries not included).    

Modes can by cycled and any time during use by a tap of the switch.   When the light is turned off for more than 3 seconds the microchip will memorize the last mode used ( off time memory).

Lanyard is included.

USER INTERFACE:

None other than Dr.Jones Guppy2drv.  The ultimate in flexibility.   This UI offers a wide range of modes to choose from.  Something for almost any occasion.

User Selectable Groups:

  1. 1% - 25% - 100% | Memory
  2. 1% - 25% - 100% | No Memory
  3. 100% - 25% - 1% | No Memory
  4. 1% - 25% - 100% - Strobe | No Memory
  5. 1% - 25% - 100% - Strobe | Memory
  6. 10% - 100% | Memory
  7. 10% - 100% | No Memory
  8. 100% - 10% | No Memory
  9. 100%
  10. 100% - Strobe | No Memory
  11. Strobe - 100% | No Memory
  12. ML - 2% - 25% - 100% | Memory
  13. ML - 2% - 25% - 100% - Strobe - Beacon | No Memory
  14. ML - 100% | No Memory
  15. 100% - ML | No Memory
  16. ML - 100% | Memory
  17. ML - 1% - 5% - 15% - 40% - 100% | Memory
  18. ML - 1% - 5% - 15% - 40% - 100% | No Memory
  19. 100% - 40% - 15% - 5% - 1% - ML | No Memory
  20. 100% - 40% - 15% - 5% - 1% - ML | Memory
  21. 1% - 5% - 15% - 40% - 100% | Memory
  22. 1% - 5% - 15% - 40% - 100% | No Memory
  23. 100% - 40% - 15% - 5% - 1% | No Memory
  24. 100% - 40% - 15% - 5% - 1% | Memory



Guppydrv ​Instructions


To switch mode groups: rapidly tap the switch 8 times, the light will then enter the programming mode and begin to flash. With the light in programming mode, tap the switch the same number of times as your desired mode group. The light will blink and your mode group will be memorized.

Example: To select mode group 3, tap the switch 8 times quickly to enter programming mode. As soon as the light enters programming mode and beings flashing, tap the switch three times. The light will blink to recognize the mode group change.

To set the turbo timer: rapidly tap the switch 8 times, the light will then enter the programming mode and begin to flash. With the light in programming mode, tap the switch 30 times to enter the turbo timer set mode. The light will then switch to 100% power. When the light is at the desired temperature for the turbo step down, turn the light off. The turbo timer will then be set. The turbo timer steps the light down to 50% regardless of the mode group set.

To disable the turbo timer simply go into program and cut it off in >3 seconds.

Here is a short video on how this UI works.

Please be aware of the heat.   When the head of the light is hot to the touch you need to reduce output to a lower mode.  Do NOT leave the light running unattended. 


Q: What makes the Adventure Sport™  products different from others with similar clams?

A: These lights were built, then tested, then advertised.    Many of the other manufactures in the market simply write down what number they would "like" for the output of their flashlights to be and then post it for sale.   A lot of these numbers have no basis in reality.    A perfect example are the lights often called "XML T6" or similar claiming 1600 lumens from a single XML.     These are typically made with a very low bin cheap emitter and a moderate powered driver board and the yield will vary, often coming up to only a very small percentage of the claim ( a few hundred).

ASFlashlights are built with premium components, including top bin emitters, upgraded thermal paths and heat sinking, and extreme output custom driver boards.     Output from light to light will vary slightly, but all the lumen claims are a result of actual out the front measurements, and guaranteed to be realistic.

Please Note: These lights are very high powered, and have the potential to cause fire, eye injury, burning of skin and other.  Adventure Sport Flashlights™ is NOT responsible for accidents or damage including but not limited to fire or personal injury resulting from use or misuse of its products.   By purchasing you agree to these terms.

Reviews

Grade 
07/22/2017

Big Bang for the Buck!

My initial impressions of this light are that you get a lot of options and features for your money. This is a powerful small light. The grey blue color is aesthetically pleasing too. The driver software offers 24 options allowing for great flexibility. The beam and throw are well balanced and the 6500k is cool and clear.

  • 1 out of 1 people found this review useful.
Grade 
08/07/2016

Great flashlight!

When I got this flashlight and was very pleasantly surprised the quality amazing. I love the ui, it takes done getting used to, but it's fun learning to use it and very simple one you use it for a while. The beam shot is a perfection combination of throw and flood. I've only had it a few days, but it's my new favorite 18350 flashlight. I use it at work as a mechanic and it runs all day on med for me. Recommend investing in this one to anyone who wants quality. Also, has spring bypass already done which was aweSome!

  • 1 out of 1 people found this review useful.
Grade 
08/07/2016

Great flashlight!

When I got this flashlight and was very pleasantly surprised the quality amazing. I love the ui, it takes done getting used to, but it's fun learning to use it and very simple one you use it for a while. The beam shot is a perfection combination of throw and flood. I've only had it a few days, but it's my new favorite 18350 flashlight. I use it at work as a mechanic and it runs all day on med for me. Recommend investing in this one to anyone who wants quality. Also, has spring bypass already done which was aweSome!

  • 1 out of 1 people found this review useful.

Write your review!

Write a review

Convoy S2+, 915 Lumen, 18350, XPL-HI V2

Convoy S2+, 915 Lumen, 18350, XPL-HI V2

-Cree XPL-HI  LED emitter, 6500k color temp

-IMR 18350 powered

-Choose your on modes custom UI (3 mode with memory by default)

-Low voltage protection

-lanyard included

-Size: 84mm x 24mm

-Color: Grey

-Optional pocket clip

Summary

  • Product Name:Convoy S2+, 915 Lumen, 18350, XPL-HI V2
  • Price: $ 55.88
  • Product Width: 1.40 IN
  • Product Height: 1.40 IN
  • Product Depth: 4.80 IN
  • Product Weight: 0.15 LBS
  • Rating: 4.66666666667/5 based on 3 user ratings
  • Description: -Cree XPL-HI  LED emitter, 6500k color temp -IMR 18350 powered -Choose your on modes custom UI (3 mode with memory by default) -Low voltage protection -lanyard included -Size: 84mm x 24mm -Color: Grey -Optional pocket clip
Path: > Convoy S2+, 915 Lumen, 18350, XPL-HI V2