-Cree XHP-50 J4 1D 6200K bin emitter
-2 x IMR 18350 powered ( not included)
-Choose your own modes custom user interface (3 mode with memory is default)
-Low voltage protection
-Removable/reversible pocket clip
-Size :124mm x 24mm
Warning: Last items in stock!
The Adventure Sport™ custom S8 is the perfect synergy of form and function.
This light combines its small form factor with a flexible intelligent user interface and extreme output.
The light is powered by a pair of IMR 18350 cells ( batteries NOT included) and can produce over two thousand lumens of light. The LED has been de-domed for improved beam quality (reduces articles caused by quad die emitters) and increased ange. The user interface is a four mode that includes moonlight, low, high, and Burst mode. It was engineered to provide the user ultimate flexibility, maximum output and the option for long run times. Modes can be changed while the light is on by a simple tap of the switch.
Because of the intense heat generated by the XHP-50 the turbo timer will come preset on this light at 40 seconds to protect it. When timer kicks in output is reduced to 50%.
Modes can by cycled and any time during use by a tap of the switch. When the light is turned off for more than 3 seconds the microchip will memorize the last mode used ( off time memory).
None other than Dr.Jones Guppy2drv. The ultimate in flexibility. This UI offers a wide range of modes to choose from. Something for almost any occasion.
User Selectable Groups:
To switch mode groups: rapidly tap the switch 8 times, the light will then enter the programming mode and begin to flash. With the light in programming mode, tap the switch the same number of times as your desired mode group. The light will blink and your mode group will be memorized.
Example: To select mode group 3, tap the switch 8 times quickly to enter programming mode. As soon as the light enters programming mode and beings flashing, tap the switch three times. The light will blink to recognize the mode group change.
To set the turbo timer: rapidly tap the switch 8 times, the light will then enter the programming mode and begin to flash. With the light in programming mode, tap the switch 30 times to enter the turbo timer set mode. The light will then switch to 100% power. When the light is at the desired temperature for the turbo step down, turn the light off. The turbo timer will then be set. The turbo timer steps the light down to 50% regardless of the mode group set.
To disable the turbo timer simply go into program and cut it off in >3 seconds.
Here is a short video on how this UI works.
Lanyard and removable/reversible pocket clip are also included.
Q: What makes the Adventure Sport™ products different from others with similar clams?
A: These lights were built, then tested, then advertised. Many of the other manufactures in the market simply write down what number they would "like" for the output of their flashlights to be and then post it for sale. A lot of these numbers have no basis in reality. A perfect example are the lights often called "XML T6" or similar claiming 1600 lumens from a single XML. These are typically made with a very low bin cheap emitter and a moderate powered driver board and the yield will vary, often coming up to only a very small percentage of the claim ( a few hundred).
ASFlashlights are built with premium components, including top bin emitters, upgraded thermal paths and heat sinking, and extreme output custom driver boards. Output from light to light will vary slightly, but all the lumen claims are a result of actual out the front measurements, and guaranteed to be realistic.
Please Note: These lights are very high powered, and have the potential to cause fire, eye injury, burning of skin and other. Adventure Sport Flashlights™ is NOT responsible for accidents or damage including but not limited to fire or personal injury resulting from use or misuse of its products. By purchasing you agree to these terms.
No customer reviews for the moment.